Heating Services

TRM Innovations Ltd can help with heating work connected to bathrooms, kitchens, utility rooms, extensions, garage conversions, garden rooms, refurbishments and wider home improvement projects.

This may include radiator changes, towel radiators, pipework alterations, heating layout planning, heating controls and heating considerations linked to wider building work.

Radiators can often be installed, replaced or repositioned as part of a refurbishment, extension, bathroom, kitchen or room improvement project.

The existing heating system, pipe routes, wall space, room size and finished layout all need to be considered before the work is confirmed.

Yes, towel radiators can often be included in bathroom, en-suite, shower room and utility room projects.

The room layout, pipe positions, wall strength, heating output, ventilation and finish all need to be considered so the towel radiator is practical and correctly positioned.

Existing radiators can often be moved where pipe routes, access and the heating system allow.

This may be needed when opening up a room, changing a kitchen layout, adding new doors, fitting wardrobes, creating an extension or improving furniture placement.

Yes, heating can be planned as part of bathroom refurbishment work, especially where a radiator is being replaced with a towel rail or the bathroom layout is changing.

The heating position should be considered alongside the bath, shower, toilet, basin, door swing, ventilation, tiling and storage.

Yes, kitchen refurbishments and kitchen extensions often need heating reviewed because new units, appliances, doors or open-plan layouts can affect radiator positions.

Heating should be planned early so radiators, pipework and controls do not clash with cabinets, islands, dining areas or appliance positions.

Yes, heating is often needed in extensions, especially where the new space will be used as a kitchen, dining room, living area, office, utility room or bathroom.

The heating requirement should be considered with insulation, room size, glazing, building regulations, system capacity and the intended use of the room.

Yes, garage conversions usually need proper heating if the space is being turned into an office, bedroom, gym, playroom, utility room or living area.

The existing garage structure, insulation, ventilation, floor build-up and available heating options will affect what is practical.

Garden rooms may need heating if they are intended for regular use as an office, studio, gym or hobby space.

The heating approach should be planned with insulation, power supply, ventilation, usage patterns and the distance from the main property.

Underfloor heating may be considered for some bathrooms, kitchens, extensions and refurbishment projects where the floor build-up and product choice are suitable.

The room, flooring, insulation, controls, heating output and manufacturer instructions all need to be reviewed before the work is confirmed.

Any gas boiler work must be carried out by a Gas Safe registered engineer. TRM Innovations Ltd will not present general building work as a substitute for regulated gas work.

If boiler changes or gas appliance work are required as part of a project, this should be discussed clearly so the correct qualified person is involved.

Heating controls can often be considered as part of a wider heating, extension, conversion or refurbishment project.

This may include thermostat positions, radiator valves, towel radiator controls or controls for electric heating products, depending on the room and system.

Heating pipework can often be altered where the existing system, access and project requirements allow.

This may be needed when radiators are moved, rooms are remodelled, bathrooms are changed, kitchens are redesigned or new spaces are created.

Yes, heating is often reviewed during full or partial refurbishments, especially where layouts, flooring, walls, bathrooms, kitchens or room use are changing.

Planning heating alongside the wider refurbishment helps avoid awkward radiator positions, exposed pipework or late changes after rooms have been finished.

A cold room may need more than a larger radiator. Insulation, draughts, glazing, ventilation, room size, heating output and the existing system should all be considered.

TRM Innovations Ltd can review heating needs as part of wider building or refurbishment work and explain what may need to be checked before a solution is chosen.

Some heating work may need to meet Building Regulations requirements, especially where new habitable rooms, extensions, conversions or fixed building services are involved.

The requirements depend on the type of project and should be considered before work begins, particularly where energy efficiency, insulation or system changes are involved.

The cost depends on the type of heating work, access, pipe routes, radiator choices, controls, room size, existing system condition and whether the work is part of a larger project.

TRM Innovations Ltd can provide a free estimate after understanding the property, the room and the heating work required.

Yes. TRM Innovations Ltd is based in Bexleyheath and covers Dartford along with surrounding areas across Bexley, South East London and nearby Kent.

This includes Welling, Sidcup, Bexley, Blackfen, Erith, Crayford, Abbey Wood, Eltham, Chislehurst, Bromley and Greenwich where suitable.

TRM Innovations Ltd has been running since 2014 and specialises in extensions, refurbishments and kitchens, which is useful when heating forms part of a larger home improvement project.

The team can help with practical planning, trade coordination, clear advice and heating work designed around the finished room, not just the radiator or pipework itself.